Ryobi RPD500-G User Manual

English
1
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
UK
Safety, performance, and dependability have been given
top priority in the design of your percussion drill.
INTENDED USE
The percussion drill / driver is intended to be used only by
adults who have read and understood the instructions and
warnings in this manual and can be considered responsible
for their actions.
The percussion drill/driver can be used for drilling into
various materials, including wood, metal, and plastics
using a drill bit with shank having a diameter of less than
PP:KHQ¿WWHGZLWKDVXLWDEOHVFUHZGULYHUELWLWFDQ
be used for inserting and removing screws. It can also be
used in impact drilling mode for drilling masonry and similar
materials.
Do not use the percussion drill/driver in any way other than
those stated for intended use.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
HOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\
Save all warnings and instructions for future reference.
DRILL AND SCREWDRIVER SAFETY WARNINGS
Ŷ Wear ear protectors when impact drilling. Exposure
to noise can cause hearing loss.
Ŷ Use auxiliary handle(s), if supplied with the tool.
/RVVRIFRQWUROFDQFDXVHSHUVRQDOLQMXU\
Ŷ Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Ŷ Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
Ŷ Wear safety goggles to protect your eyes from flying
particles and splinters.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
Ŷ Risk of electrocution if electric cables are drilled into
– Always grasp the tool by designated handles, do
not touch the drill bits.
Ŷ Damage to the respiratory system
– Wear respiratory protection masks containing filters
appropriate to the materials being worked. Ensure
adequate workplace ventilation. Do not eat, drink or
smoke in the work area.
Ŷ Damage to hearing
– Always wear effective hearing protection and limit
exposure to noise.
Ŷ Damage to eyes from flying dust and debris particles
– Always wear suitable eye protection.
Ŷ ,QMXU\FDXVHGE\YLEUDWLRQ
– Hold the tool by designated handles and limit
exposure to vibration. See “RISK REDUCTION”.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
QXPEQHVVDQGEODQFKLQJRIWKH¿QJHUVXVXDOO\DSSDUHQW
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
Ŷ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. ,WLVUHSRUWHGWKDWFROGZHDWKHULVDPDMRUIDFWRU
contributing to Raynaud’s Syndrome.
Ŷ After each period of operation, exercise to increase
blood circulation.
Ŷ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
,QMXULHVPD\EHFDXVHGRUDJJUDYDWHGE\SURORQJHGXVH
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 78.
1. Keyless chuck
2. Drill/impact shift knob
3. Forward/ reverse button
4. Lock-on button
5. Trigger
6. Auxiliary handle

Ryobi RPD500-G Specifications

General

Brand	Ryobi
Model	RPD500-G
Category	Drill
Language	English