To Next Page

To Previous Page

5.4 Heat/Cool mode

User can set thermostat for heating or cooling. In HEAT mode thermostat is displaying ame icon all the time. When thermostat is in HEAT mode and

thermostat is CALLING for HEAT – the ame icon is ashing. In COOL mode thermostat is displaying snowake icon all the time. When thermostat is

switched to the COOLING mode and the thermostat is CALLING for COOL – then the snowake icon is ashing. Default mode is HEAT MODE.

NOTE: every time when thermostat need to start call for cooling then it can be delayed for about 3 minutes.

To set selected mode please follow steps below:

HOW TO SET COOLING MODE:

HOW TO SET HEATING MODE:

By default thermostat is in HEATING

mode (ame icon is displaying).

To change the thermostat into the

COOLING mode – press and hold the

SNOWFLAKE button for 5 seconds.

To change the thermostat into the

HEATING mode – press and hold the

SNOWFLAKE button for 5 seconds.

When thermostat is switched to the

COOLING mode – the snowake icon

is steady ON. If thermostat is CALLING

for COOL – then the snowake icon is

ashing.

When thermostat is switched to the

HEATING mode – the ame icon is

steady ON. If thermostat is CALLING

for HEAT – then the ame icon is

ashing.

5 sec

Salus RT310 User Manual

Other manuals for Salus RT310