Samson SERVO 200 User Manual

3
Servo Series Features
The Samson Servo Series power amplifier utilizes the latest technology in professional power amplifier design. Here are some of
its main features:
• Power to spare - Each amplifier delivers the following power ratings.
Servo 200 2 x 66 Watts at
8Ω,
2 x
100
W
atts at
4
Ω
Servo 300 2 x 100 Watts at
8Ω,
2 x
150
W
atts at
4
Ω
Servo 600 2 x 225 Watts at
8Ω,
2 x
300
W
atts at
4
Ω
• For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more power, with power rat-
ings of 200 watts for the
Servo 200,
300
watts for the
Servo 300,
and
600
watts for the
Servo 600,
all driving an 8 Ohm load.
• Clean, crisp sound - Impressive audio specifications such as 0.04% THD, dynamic range of 105 dB, crosstalk of 80 dB, and fre-
quency response of 10 Hz to 55 kHz guarantee ultra-clean sound quality.
• Independent input level controls for each channel allow precision adjustments.
• 10 segment LED signal indicators for each channel continuously display power output levels and allow you to correct for
overloading (clipping) conditions.
• Unique stable bipolar circuit design that continuously keeps DC output during idling at or near zero volts (thus keeping idle
speakers at their zero point). This serves to minimize heat overload problems by effectively preventing the Servo Series from
applying power when unnecessary.
• Forced air cooling via two temperature-sensitive, variable speed fans provides reliable performance without thermal and
overheating problems.
• Protection relay circuitry (with dedicated LEDs for each channel) that guards against overheating or faulty wiring conditions
and also prevents “thumps” when powering on or off. This means that you can use the Servo Series with a single power strip
into which a mixer or other audio devices are connected, without danger of damage to connected speakers.
• Input connectors for each channel accommodate both RCA or balanced 1/4-inch TRS plugs.
• Output connections are made via 5-way binding posts
.
• Toroidal transformer power supply for high current and low profile.
• User-resettable circuit breaker for fast, easy startup following a power supply overload.
• The Servo Series can be mounted in any standard 19" rack (taking just two rack spaces), making it easy to integrate the amp
into any fixed or traveling PA rig.
• Rugged construction (an all-steel chassis with a cool gray finish and a lightweight anodized aluminum heat sink) makes the
Servo Series eminently roadworthy.
• Extended three-year warranty.
• Last but certainly not least, value. The Samson Servo Series has been designed from the ground up to deliver excellent yet
affordable sound quality
.




Samson SERVO 200 Specifications

General

Damping factor	280
Amplifier class	A/B
Frequency range	20 - 20000 Hz
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.05 %
RMS power output per channel (8 Ohm)	66 W
Bridge-mode power output per channel (8 Ohm)	200 W
Headphone connectivity	6.3 mm
Speakers connectivity type	6.35 mm / RCA
Purpose	-
Product color	Black
Connectivity technology	Wired
AC input voltage	115-230 V
AC input frequency	50 - 60 Hz
Power protection features	Over current, Overheating, Short circuit
LED indicators	Yes

Weight and Dimensions

Depth	297 mm
Width	483 mm
Height	89 mm
Weight	6820 g