Ventilating Your Room
If the air in your room is stale, you can ventilate the room using the
Fan feature.
1
Turn the operating mode selection dial and set it to “HI FAN” or “LOW FAN”
position.
Result: ◆ The air conditioner starts up in fan mode.
➢
◆ HI FAN : The fan turns rapidly.
◆ LOW FAN : The fan turns slowly.
◆ You can change modes at any time.
2
To control the direction of the air flow, refer to page 9.
3
If you wish to discharge stale air, push the ventilation lever on the front
of the unit to the right and open position ( ).
Result:
The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position ( ).
Result:
The air simply circulates inside the room.
E-
7
To Next Page
Loading...
Need help?
General
