When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1 Press the button.
Result: The symbol is displayed.
2
Example: To select channel 42, press 4, followed by 2.
Once you have stored the channels on your television, you can
switch easily from one channel to another using the remote
control.
To switch... Press...
To the next channel .
To the previous channel .
To another channel The numeric button(s) corresponding
to that channel.
Press PRE-CH (Pre Channel button) to switch repeatedly between last two
channels displayed. This can be done as many times as required.
Enter the two-digit channel number or three-digit channel number.
To select channel 187, Press -/--/--- till "---" is displayed. Then
press 1, followed by 8, followed by 7.
"--" or "---"
Changing Channels
Pre-Channel
Press CH.SCAN (Channel Scan button) for a 2 Second review of each
added channel. Press any key to exit Channel Scanning.
Selecting a Channel Numbered Ten or Over
To Next Page
Loading...
Need help?
General
