3-7Samsung Electronics
Step 1 : Enter the Option Setup mode.
1
st
Take out the batteries of remote control.
2
nd
Press the temperature button simultaneously and
insert the battery again.
3
rd
Make sure the remocon display shown as.
3-2 Setting Option Setup Method
ex)
Step 2 : Enter the Option Setup mode and select your option according to the following procedure.
Only blue colored 20 digits should be set
1
st
Set 2 digits using Button.
2
nd
Press button, then will move to down.
3
rd
Set next 2 digits.
4
th
After setting 10 digits, press button, then "OFF timer" will be displayed.
5
th
Set next 2 digits.
To Next Page
Loading...
Need help?
General
