Samsung ML-1710P User Manual

U SING P RINT M ATERIALS
3.12
Printing on Labels
1 Open the rear output tray. Load labels in the manual feeder
with print side up.
2 Adjust the guide to fit the width of the labels.
Guidelines
• Only use labels recommended for laser printers.
• Verify that the labels’ adhesive material can tolerate fusing
temperature of 200°C (392°F) for 0.1 second.
• Make sure that there is no exposed adhesive material
between the labels. Exposed areas can cause labels to peel
off during printing, which can cause paper jams. Exposed
adhesive can also cause damage to printer components.
• Do not feed a sheet of label through the printer more than
once. The adhesive backing is designed for one pass through
the printer.
• Do not use labels that are separating from the backing sheet
or are wrinkled, bubbled, or otherwise damaged.

Samsung ML-1710P Specifications

General

Color	No
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	11 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Internal memory	8 MB
Processor model	Samsung
Built-in processor	Yes
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Compatible operating systems	Compatibility Windows, Linux, Macintosh
Maximum input capacity	250 sheets

Weight and Dimensions

Dimensions (WxDxH)	348 x 335 x 193 mm