Samsung QM50R User Manual

20
Conguring the touchscreen monitor settings
To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product.
"
First connect the touchscreen monitor before configuring the following settings.
"
The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings.
"
If Tablet PC Settings is not found in Control Panel, search for Tablet PC Settings from Search Control Panel.
"
If used in a multi-screen setup, make sure you have configured QMR-T as the main display.
Calibration
"
Instructions below are for Windows 8. The same method applies to both Windows 7,
Windows 8 and Windows 10.
"
After changing the Picture Size from the OSD menu, you may need to calibrate the picture
settings again.
"
Upon occurrence of an error during calibration, go to Tablet PC Settings. In the Display tab,
tap Reset and calibrate again.
1
In the Display tab, select Setup under Configure.
2
Tap the page displayed on the product with your finger.
"
In dual monitor mode: If the following page does not appear on the product, press the
Enter key to display the page.
Touch this screen to identity it as the touchscreen.
If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool, press Esc.

Samsung QM50R Specifications

General

Response time	8 ms
Display diagonal	50 \
Display brightness	500 cd/m²
Display technology	-
Native aspect ratio	16:9
LED backlighting type	Edge-LED BLU
Contrast ratio (typical)	4000:1
High Dynamic Range (HDR) supported	Yes
Dynamic contrast ratio marketing name	Mega Contrast
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	117 W
Processor model	A72
Processor family	ARM Cortex
Processor frequency	1.7 GHz
Purpose	Commercial
RMS rated power	10 W
Number of built-in speakers	2
HDMI ports quantity	3
Package depth	152 mm
Package width	1269 mm
Package height	784 mm
Package weight	17600 g
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 80 %
Mounting type	Wall
Product color	Black
Product design	Digital signage flat panel
Anti-glare screen	Always gives an optimal view, even in direct sunlight.
Placement supported	Indoor
Panel mounting interface	200 x 200 mm

Weight and Dimensions

Display depth	46.3 mm
Display width	1121.4 mm
Display height	643.9 mm
Display weight	13400 g