Leveling the refrigerator
Now that the doors are back on the refrigerator, you will want to make sure the
refrigerator is level so you can then make nal adjustments. If the refrigerator is
not level, it will not be possible to get the doors perfectly even.
NOTE
•
The front of the refrigerator is also adjustable.
When the Freezer door is lower than the fridge
Insert a at-blade screwdriver
into a notch on the Leg, turn it
clockwise or counter clockwise to
level the freezer.
When the Freezer door is higher than the fridge
Insert a at-blade screwdriver
into a notch on the Leg, turn it
clockwise or counter clockwise
to level the fridge.
NOTE
•
Refer to the next section for the best way to make very minor adjustments to the doors.
•
The legs of product are unconnected when it is out of factory. Make sure to adjust the legs
to touch the oor, and make the product level before using.
•
For safety reasons, adjust the front side a little higher than the rear side.
Installation
To Next Page
Loading...
Need help?
General
