Connecting to the water supply line
Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.
CAUTION
The water line must be connected to
the cold water pipe.If it is connected
to the hot water pipe, it may cause
the lter to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the refrigerator or ice
maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
NOTE
If the coupler does not t on the current tap, go the nearest authorised
service dealer and purchase the right couplers ttings.
Installation
To Next Page
Loading...
Need help?
General
