Making minor adjustments to the doors
Remember, a leveling refrigerator is necessary for getting the doors
perfectly even. If you need help, review the previous section on leveling
the refrigerator.
When the door of the freezer is higher
than the fridge
Adjustment part
In the case of the process to correct the imbalance is the same. Open
the doors and adjust them, one at a time, as follows:
1.Unscrew the nut
1
from the lower hinge until it reaches the upper end of
the bolt
2
.
3
2
1
Wrench
Bolt
Nut
NOTE
•
When you release the nut
1
, make sure that you use the Allen wrench (4mm)
3
to
loosen the bolt
2
in a counter-clockwise direction. You should then be able to unscrew the
nut
1
with your ngers.
2.Adjust the height difference between the doors by turning the bolt
2
clockwise or counter clockwise
To Next Page
Loading...
Need help?
General
