Samsung SCB-2000 User Manual

COLOR CCD CAMERA User Guide
28
COLOR CCD CAMERA User Guide
29
Operating Your Camera
- AREA SEL : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA SEL.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
Select a desired EXIT mode using the Left and Right buttons depending on the camera
purpose.
-SAVE :SavethecurrentsettingsandexittheMAINSETUPmenu.
-NOTSAVE:DonotsavethecurrentsettingsandexittheMAINSETUPmenu.
- RESET : Resets the camera settings to the factory defaults. Language and Monitor
settings are not initialized.

LANGUAGE:Youcanselectthemenulanguageaccordingtoyourrequirements.

RETURN :SelectthistosavetheSPECIALmenusettingsandreturntotheMAIN
SETUP menu.
• AstheDISfunctionusesthedigitalzoomthecamera'sresolutionwilldecrease.
• DISdoesn’toperatewhenbackgroundilluminationistoolow.
• DISdoesn’toperatewhenobjectpatternismonotonicaslikeskyorwhitewall.
Notes

DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
EXIT
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
●
Nothing appears on the screen.
▶ Check that the power cord and line connectionbetween the camera and monitor are
fixed properly.
▶ Check the type of lens.
▶ Check that the lens type is VIDEO lens or DC lens.
● The image on the screen is dim.
▶ Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶ Set the monitor to proper condition.
▶ If the camera is exposed to too strong light, change the camera position.
● The image on the screen is dark.
▶ Adjust the contrast feature of the monitor.
▶ If you have an intermediate device, set the 75Ω / Hi-z properly.
● The camera is not working properly, and the surface of the camera is hot.
▶ Check that you have properly connected the camera to an appropriate power source.
● The SENS-UP function does not work.
▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
● The Motion Detection function does not work.
▶ Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
● Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
● The screen flickers continually.
▶ Check that direction of camera turns toward the Sun.
● When coaxial communication is not available:
▶ Make sure that the camera and monitor are installed within the recommended distance.
▶ Use the video amplifier equivalent to coaxitron if the recommended installation
distance is exceeded.
1) WhentheSPECIALmenuscreenisdisplayed,presstheUpandDownbuttonsso
thatthearrowindicates‘PRIVACY’.
 2)  Set up the mode using the 4 direction buttons.

Samsung SCB-2000 Specifications

General

Maximum resolution	- pixels
Number of TV lines	600
Supported video modes	-
Camera shutter speed	1/200 s
Minimum illumination	0.0001 lx
Sensor type	CCD
Optical sensor size	1/3 \
Optical zoom	- x
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Mounting type	Ceiling/wall
Product color	Black
Housing material	Aluminium, Steel
Ethernet LAN	No
AC input voltage	230 V
Power consumption (typical)	4 W
Cables included	Coaxial
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Dimensions (WxDxH)	58 x 121 x 52 mm

Weight and Dimensions

Depth	121 mm
Width	58 mm
Height	52 mm
Weight	510 g