Time schedule
You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Event setup>.
3. Select <Time schedule> from <Event
action setup>.
4. Set whether or not to <Enable>.
5. Specify the <Transfer interval>.
6. Specify the <Activation time>.
• Always : Always activates in
operated mode at the set interval.
• Only scheduled time : Periodically
activates in operated mode at a
specified time and date.
7. Specify the activation conditions.
• FTP : Specify the use of the FTP transfer if an event occurs.
8. When done, click [Apply (
)].
English _69
● SETUP SCREEN
To Next Page
Loading...
Need help?
General
