Chapter Three: Adjusting Your Monitor
COLOR
TEMP.
Color Temperature
Follow these steps to change the color temperature set-
ting. Color Temperature is a measure of the “warmth” of
the image colors.
1
Push this button once to access the color tempera-
ture function.
2
Use the
V
and
A
buttons to select between the
9300K color and the 6500K color.
Recall
Use this button to return the settings to their original fac-
tory settings.
Push and hold in the recall button for several sec-
onds, or until the power indicator LED changes from
orange to green.
After pushing this button, a green LED indicates that the
factory settings for the current video signal timing have
been recalled. The OSD shows the progress of the recall
function.
Note : This operation resets all of the data in the user
memory area for the current timing signal.
Degauss
The Degauss feature will remove any color impurity
caused by magnetic fields. Do not use the Degauss feature
more than once within a 30-minute period.
Push the button once to activate the degaussing cir-
cuit. The monitor may buzz momentarily, the image
colors may change and the image will jiggle for a few
seconds. These effects are normal.
The degaussing circuit automatically turns itself off after a
few seconds.
WARNING : Don’t push and hold the degauss button for
longer than 5 seconds. If you do, this operation resets all of
the data in the user memory area. If this occurs, you must
remake your user adjustments.
9
To Next Page
Loading...
Need help?
General