Overview | Installation | OSD Mode |
Color
Calibration
| Uninstall | Troubleshooting
Troubleshooting
z MagicTune may not work in case monitor is replaced or driver of graphic card is updated while
MagicTune is operating. If so, please restart the system.
Check when MagicTune does not function properly.
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.
z Visit the MagicTune
website
for technical support for MagicTune, FAQs (questions and answers) and
software upgrades.
* To check whether your PC is available for MagicTune feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new
Hardware.
To Next Page
Loading...
Need help?
General