Samsung SyncMaster 943NW User Manual

Connections
Connecting Cables
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[RGB IN]
Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection cable.
Note
If the monitor and the computer are connected, you can turn them on and use them.
13

Samsung SyncMaster 943NW Specifications

General

Display diagonal	16 \
Separate H/V sync	Yes
Display resolution	1440 x 900 pixels
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	8000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Display brightness (typical)	300 cd/m²
Certification	TCO'03
Product color	Black
Market positioning	-
Special features	MagicBright3, MagicWizard, MagicTune + AssetManagement
Panel mounting interface	75 x 75 mm
Power consumption (standby)	1 W
Power consumption (typical)	34 W
Package weight	5100 g

Weight and Dimensions

Depth (with stand)	185 mm
Height (with stand)	368 mm
Depth (without stand)	68 mm
Width (without stand)	439 mm
Height (without stand)	390 mm
Weight (without stand)	3800 g