13
Using the speed dome features
Once the pattern tours, and groups have been
programmed in the speed dome setup menu, they can all be
accessed directly from the PTZ control equipment by using the
following sequences.
1. To start a pattern tour press:
SHOT - 13X - ENTER
Where X is a pattern tour number between 1 & 4
The selected pattern tour will run indefinitely until a manual movement is made by the
operator or an alarm input is received.
2. To start a scan function, press:
SHOT - 14X - ENTER
Where X is a scan function number between 1 & 8
The selected scan function will run indefinitely until a manual movement is made by the
operator or an alarm input is received.
3. To start a group, press:
SHOT - 15X - ENTER
Where X is a group number between 1 & 8
The selected group will run indefinitely until a manual movement is made by the operator or
an alarm input is received.
scan functions
Shortcut Menu
SHOT - NO.-ENTER FUNCTION
0 (TWICE) ENTER MAIN MENU
33 RESERVED
34 RESERVED
62 RESERVED
63 RESERVED
92 RESERVED
93 RESERVED
94 REMOTE RESET
95 ENTER MAIN MENU
131-134 CALL PATTERN
141-148 CALL SCAN
151-158 CALL GROUP
161-165 RESERVED WORD
170 WDR OFF
171 WDR ON
172 AE AUTO
173 SET SHUTTER SPEED TO 1/120 SEC
181 LEFT POINT OF PAN LIMIT
182 RIGHT POINT OF PAN LIMIT
183 START PAN LIMIT FUNCTION
184 DISABLE PAN LIMIT FUNCTION
To Next Page
Loading...
Need help?
General
