English - 14
Changing the Input Source
Source
Use to select TV or an external input source
such as a DVD player / Blu-ray player / cable
box / STB satellite receiver.
1. Press the SOURCE button on your
remote.
2. Select a desired external input source.
■■ TV / PC / AV1 / AV2 / Component /
HDMI1/DVI / HDMI2 / HDMI3 / HDMI4
/ USB / AllShare
✎
You can only choose external devices that are
connected to the TV. In Source, connected inputs will
be highlighted.
✎
In the Source, PC is always stays activated.
Edit Name
Edit Name lets you associate a device name to an input
source. To access Edit Name, press the TOOLS button In
Source. The following selections appear under Edit Name:
■ VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
✎
If you have connected a PC to the HDMI IN 1 (DVI) port
with an HDMI cable, select PC under Edit Name to
enter a device name.
✎
If you have connected a PC to the HDMI IN 1 (DVI)
port with an HDMI to DVI cable, select DVI PC under
Edit Name to enter a device name.
✎
If you connected an AV device to the HDMI IN 1 (DVI)
port with an HDMI to DVI cable, select DVI Devices
under Edit Name to enter a device name.
Edit Favorites
In Source, press the TOOLS button to select Edit
Favorites. You can set an external input source as a
Favorites.
Information
You can see detailed information about the selected external
device.
Refresh
In Source, If the external devices are not displayed,
press the TOOLS button to select Refresh, then search for
the connected devices.
[UD6000(6050)-ZA]BN68-03330A-02Eng.indb 14 2011-02-21 오후 3:44:12
To Next Page
Loading...
Need help?
General