English - 4
Viewing the Control Panel
✎
The product color and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
E
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display), which contains controls for
your TV’s features.
y Adjusts the volume. In the OSD, use the y buttons as you would use the
◄ and ► buttons on the remote control.
z
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
P
(Power)
Turns the TV on or off.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
Install the Stand
See the separate stand installation guide for more detailed instructions.
Stand (depending on the model) Guide Stand Screws
C
D
x4 (M4 X L12)
A
1 EA
B
1 EA
x4 (M4 X L8)
Control Panel
[UD6000(6050)-ZA]BN68-03330A-02Eng.indb 4 2011-02-21 오후 3:43:58
To Next Page
Loading...
Need help?
General