English 29
Operations
Operations
Control panel
WW8*J6*****
01
02
03 04 05 06
07
08
09
11
10
WW9*J6*****
01
02
03 04 05 06
07
08
09
11
10
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
05 Spin
Press to change the spinning speed for the current cycle.
• Rinse Hold
: The nal rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin process.
• No Spin : The drum does not spin after the nal drain process.
06 Options
Press to select an option from Intensive, Prewash, and Intensive+
Prewash. Press again to deselect.
WW6000J(SEPM)-03580Q_EN (U.K).indd 29 2/9/2015 7:30:16 PM
To Next Page
Loading...
Need help?
General