36 English
Operations
Operations
Settings
Child Lock
To prevent accidents involving children,
the Child Lock function locks all buttons.
However, Child Lock does not activate until
you press Start/Pause.
In the holding state, you can open the
door or change settings by pressing
corresponding buttons. However, once
you press Start/Pause to start the washing
machine, the Child Lock will be reactivated.
• Child Lock locks all buttons except for
Power.
• To activate or deactivate Child Lock, hold
down Temp. and Rinse simultaneously
for 3 seconds.
NOTE
To add detergent, put more laundry in the
drum, or change the cycle settings whilst
in the Child Lock state, you must rst
deactivate the Child Lock.
Sound On/Off
You can turn on or off the key. Your setting
will remain effective after you restart the
machine.
• To mute the sound, hold down Rinse and
Spin simultaneously for 3 seconds.
• To unmute the sound, hold down again
for 3 seconds.
WW6000J(SEPM)-03580Q_EN (U.K).indd 36 2/9/2015 7:30:17 PM
To Next Page
Loading...
General
