S&C Omni-Rupter Installation

S&C Instruction Sheet 765-500 3
Introduction
Read this
Instruction Sheet
NOTICE
These instructions are for Omni-Rupter Switches with Catalog Number Supplement
“R3” and earlier. For installation instructions for Omni-Rupter Switches with Catalog
Number Supplement “R4,” please refer to your local S&C Sales Office. These instruc-
tions are also available on www.sandc.com.
Thoroughly and carefully read this instruction sheet before installing or operating your
S&C Omni-Rupter Switch. Familiarize yourself with “SAFETY INFORMATION” on pages
4 and 5.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your S&C Omni-Rupter Switch. Designate
a location where you can easily retrieve and refer to this publication.
Proper Application
Ç
CAUTION
The equipment in this publication must be selected for a specific application. The
application must be within the ratings furnished for the equipment. Refer to S&C
Specification Bulletin 765-31 for complete application information.
Warranty
The standard warranty contained in S&C’s standard conditions of sale, as set forth in Price
Sheet 150, is applicable to the S&C Omni-Rupter Switch covered in this instruction sheet
except when it is power operated using a switch operator of other than S&C manufacture.

S&C Omni-Rupter Specifications

General

Brand	S&C
Model	Omni-Rupter
Category	Switch
Language	English