7
■ Switching into /from standby mode
The Standby mode is used for switching the TV set off for short
periods of time. In standby mode the TV is switched off but is still
receiving mains power.
● To turn the TV set into standby mode, press the
4
button.
The red power indicator illuminates more brightly.
● To turn the TV set ON from standby mode, press any of the follow-
ing buttons:
4
,
5
,
6
or 0-9 buttons.
■ Auto shut off
This TV set will automatically switch into the standby mode, 10 min-
utes after a signal is no longer received. The time until the set will
switch off is displayed on the screen.
■ Use of Audio Output Jacks
This TV provides the audio monitor output jacks on the rear of the
cabinet back. You can connect your audio equipment to these jacks to
give you sound with your audio equipment.
■ Screen options
Today there are various transmission formats with different size
ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox.
■ Auto
It automatically switches to the optimum screen mode according to
the WSS signal provided in the receiving signal source. If the signal
does not have it, the TV keeps current screen mode.
✐ This setting may cause the picture to change when a different
format is received eg. when an advert is received.
✐ WSS (Wide screen signalling)
Some broadcasters transmit this signal and some VCR tapes have it
included . The signal identifies the picture format ratio (16:9, 14:9,
4:3 etc.).
If WSS is not being received and you are not happy with your pic-
ture this TV provides you the option to change it with the following
options.
Press the
WIDE button repeatedly to select your desired setting.
OPERA
OPERA
TION
TION
If you find the power indicator flashing, please turn the TV
set off with the Mains ON/OFF switch, disconnect the
power cord from the power outlet and contact our Service
desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.