-17-
Special Function
1
To enter into the special function setting mode, press and
hold the MENU button of the TV set, then press the
Recall button on the Remote Control.
Once TUNING LOCK is switched on, further channel tuning
(Pre-set) is not possible. The Channel Swapping function
also is not possible.
2
Select an item of the special functions by pressing the
PROGRAMME UP or DOWN button on the remote control
or the TV set.
3
Set the selected special function “ ON “ by pressing the
VOLUME + or
-
button. To cancel, set to “ OFF”.
(2) Tuning Lock setting
The following special functions can be set up on this TV
set.
With this function, a maximum sound volume limit can be set
at any level.
(3) Music Mode setting
When Music Mode is ON, Programme position from “247” to
“255” and “0” are set Music Mode. Only sound is provided
and any picture is not on the screen under Music Mode.
When power is turned ON, last position tunes in. Select OFF
to start from TV mode, ON to start from AV1 mode, or chan-
nel number (1-255) to start from it’s initial position.
(4) Start Mode setting
TUNING LOCKED
How to set the special function:
Note: When making the VOLUME LOCK setting, set the
desired maximum sound volume by pressing the VOLUME + or
-
button before entering Special Function setting mode.
AV1
MUSIC
Turns black
screen
4
Press the MENU button of the remote control to return to
the normal TV mode.
(1) Volume Lock setting
BASS EXPANDER ON
To set condition TV plug in. Select ON, when AC cord plug-
in, CRT TV always ON. STAND BY, when AC cord plug-in,
always stand by. LAST, when AC cord plug-in, switch on
depend on last TV condition (ON or Stand by).
(5) AC Power Mode setting
To Next Page
Loading...
Need help?
General
