Sanyo FW24E05F User Manual

Picture
Before you begin:
You must set Home in Location. L p. 29
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press MENU and use H I to select Picture, then press
ENTER/OK.
18
50
30
30
0
2
USB
Language
Features
Setup
Sound
Picture
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
2
Use H I J K to Select the item you want to adjust, then press
ENTER/OK.
Auto picture
to select the desired setting, then press ENTER/OK.
(Personal, Standard, Vivid, Sports, Movie, Game or
Eco)
When you adjust the following settings, Personal
picture will be set Automatically when Location is set
to Home.
J Cursor Cursor K
Backlight
to Reduce Power
Consumption and
Reduce Backlight
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast to Increase Contrast
Brightness
to Decrease Brightness to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red to Add Green
Sharpness
to Soften to Sharpen
Advanced settings
to Select the desired Setting, then press ENTER/OK.
(Color alignment, Noise reduction, Black stretch,
Dynamic contrast, Gamma, Film mode or BMR 120)
●
You can set a Particular Picture Quality using Advanced
settings.
On
Normal
Gamma
Dynamic contrast
Black stretch
Noise reduction
Color alignment
USB
Language
Features
Setup
Sound
Picture
On
Auto
Gamma2
On
On
BMR 120
Film mode
Color
alignment
Color
temperature
mode
to set the picture color temperature to
Personal (Cool, Normal or Warm)
When you adjust the following
settings, Personal picture will be set
Automatically when Location is set to
Home.
J Cursor Cursor K
Red gain
to Decrease Red
Contrast
to Increase Red
Contrast
Green gain
to Decrease Green
Contrast
to Increase Green
Contrast
Blue gain
to Decrease Blue
Contrast
to Increase Blue
Contrast
Red offset
to Decrease Red
Brightness
to Increase Red
Brightness
Green
offset
to Decrease Green
Brightness
to Increase Green
Brightness
Blue offset
to Decrease Blue
Brightness
to Increase Blue
Brightness
Noise
reduction
to select the desired setting, then press ENTER/OK
(Off, Minimum, Medium or Maximum)
Black stretch
Off to Set Black stretch to Off
On
to Enhance Black Color
Dynamic
contrast
Off to Set Dynamic contrast to Off
On
to Enhance Contrast in an Image
Automatically
Gamma
Gamma1
to Change the Gamma setting
(changes the Brightness and Contrast
in the picture)
Gamma2
Gamma3
Film mode
Off to Set Film mode to Off
Auto
to Optimize the Picture recorded by the
Original film
BMR 120
Off
to Set BMR 120 (Brilliant Motion Rate)
to Off
On
to Make the Video appear smoother
20 .English
Continued on next page.

Sanyo FW24E05F Specifications

General

Brand	Sanyo
Model	FW24E05F
Category	LCD TV
Language	English