Sound
Before you begin:
You must set Location to Home. L p. 29
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press MENU and use H I to select Sound, then press ENTER/OK.
USB
Language
Features
Setup
Sound
Picture
Stereo
Multichannel
On
Off
On
Standard
Primary MTS
Digital output format
TV speakers
Auto volume leveling
Virtual surround sound
Equalizer
Auto sound
Digital audio preferences
2
Use H I J K to Select the item you want to adjust, then press
ENTER/OK.
Auto sound
to select the desired setting, then press ENTER/OK.
(Personal, Standard, Vivid, Sports, Movie, Music or
News)
When you adjust the following settings (Equalizer,
Virtual surround sound or Auto volume leveling),
Personal sound will be set Automatically.
Adjust the tonal quality for each frequency.
Equalizer
Cursor I Cursor H
to adjust each level of tonal quality.
Virtual Surround Sound gives you the Stereophonic virtual space through
your existing 2-channel Stereo System.
Virtual surround
sound
Off
Natural Effect
On
Emphasized Effect
This function keeps a constant loudness level between the TV
commercials and the Programs.
Auto volume
leveling
Off
to Remove the Auto volume
leveling
On
to Reduce Volume Differences
between the TV Commercials and
the Programs
You can select the Audio Output from the Unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit’s Remote Control.
TV speakers
On
to Output Sound from the Unit’s
Speakers
Off
No Output Sound from the Unit’s
Speakers
CEC Link
to Control Audio Output from your
connected HDMI-CEC Compliant
Devices with VOL + / – by using
this Unit's Remote Control.
You can select Audio Output through a Digital Audio Output connector.
Digital output
format
Multichannel
to Output Multichannel Signals
(When the Audio of the Content is
PCM, it will be Output in PCM even
if Multichannel is selected.)
PCM
to Output PCM format
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing AUDIO. Refer to Switching Audio Mode. L p. 17
Primary MTS
Stereo
to Output Stereo Audio
Mono
to Output Mono Audio
SAP
to Output Second Audio Program
You can set the interpretive broadcasting by an audio explanation.
Digital audio
preferences
Accessibility
to prioritize VI-Visually Impaired
Streaming or HI-Hearing Impaired
Streaming: The setting for
Handicapped users (Main audio,
Visually Impaired or Hearing
Impaired).
Audio
language
to set your Preferred language in
the Audio Streaming (English,
Spanish or French).
Primary
audio
selection
criteria
to set TV Priority based on either of
the above Settings: (Accessibility
or Audio language).
21 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
