Sanyo KHS1822 User Manual

Care and Cleaning
1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This wiii damage
the internal components and cause an electric shock hazard.
Casing and Grille
(Indoor Unit)
Clean the casing and grille of the indoor unit with a vacuum cleaner brush,
or wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the grille, be careful not to force the vanes out of
place.
1. Never use solvents, or harsh chemicals when cleaning the
indoor unit. Do not wipe the plastic casing using very hot
water.
2. Some metal edges and the fins are sharp and may cause injury
if handled improperly; be especially careful when you clean
these parts.
3. The internal coil and other components of the outdoor unit
must be cleaned every year. Consult your dealer or service
centre.
Air Filter The air filter behind the air intake grille should be checked and cleaned at
least once every two weeks.
How to remove the filter
1. Move the flap on the air outlet grille to its lowest position.
2. Hold the air filter by the tab at the bottom, and pull downward.
Use a vacuum cleaner to remove light dust, if there is sticky dust on the
filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and
dry it. When replacing the filter, make sure that the FRONT mark is facing
you.
16
07 - 346-16

Sanyo KHS1822 Specifications

General

Brand	Sanyo
Model	KHS1822
Category	Heat Pump
Language	English