Sanyo KHS1822 User Manual

Remote Control Unit (continued)
SWEEP button
MODE selector switch
Timer selector switch
Fan speed selector switch
SENSOR
When you press this button, the ( sweep ) mark will appear at the lower left of
the display, and the flap in the air outlet starts moving up and down to
deliver air over the sweep range set. To stop sweeping, just press the
SWEEP button again.
SWEEP button is not provided with the following
models: KHS0921 and KHS0922
FAN: The air conditioner works only as a circulation fan.
COOL: The air conditioner makes the room cooler.
HEAT: The air conditioner makes the room warmer.
AUTO: When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room
temperature and automatically switches to the "cool" or
"heat" mode as appropriate.
NORM.: The timer does not operate.
OFF: The air conditioner stops at the set time.
ON: The air conditioner starts at the set time.
PROGRAM: The air conditioner stops and starts, or starts and stops, at the
set times every day.
AUTO: The air conditioner automatically decides the fan speeds.
HIGH: High speed for fast cooling
MED.: Medium speed
LOW: Low speed
A temperature sensor inside the remote control unit senses the room
temperature.

Sanyo KHS1822 Specifications

General

Brand	Sanyo
Model	KHS1822
Category	Heat Pump
Language	English