MAINTENANCE
1. This unit is designed to operate on 12 volts DC, NEGATIVE ground electrical
systems only. Do not attempt to install this unit in a vehicle that has a positive
ground system.
2. Do not touch the playback head with any metallic or magnetic tools.
3. This unit has built-in filtering to eliminate most of the noise that might come
through the power source. However, with some vehicles, particularly older models,
some clicking or other unwanted noise might be present.
4. Please follow the suggestions below to ensure many years of trouble-free operation.
Keep the product dry. If it does get wet, wipe it dry immediately.
Liquids might contain minerals that can corrode the electronic
circuits.
Keep the product away from dust and dirt, which can cause
premature wear of parts.
Use and store the product only in normal temperature environments.
High temperatures can shorten the life of electronic devices, damage
batteries, and distort or melt plastic parts.
Clean the front panel with a soft, clean cloth moistened with
lukewarm water and wrung dry
Handle the product gently and carefully. Dropping it can damage
circuit boards and cases and can cause the product to work
improperly.
7
BLEACH
To Next Page
Loading...
Need help?
General
