Sanyo PLC-XU300K User Manual

-16-
Mechanical Disassembly
Fig.5
b Mounting Duct, Fan(FN903, FN904, FN905) and Filter Board removal
Filter Board
F (M3x8)
G (T3x8) x2
1. Remove screw A (M4x4) , 2 screws B (T3x12) and 4screws C (T3x6) to remove the Mounting duct top,
Mounting duct bottom and fan (FN904).
2. Remove 2 screws D ( T3x12) to remove the fans (FN903 and FN905).
3. Remove screw E (T3x8) and screw F (M3X8) to remove the Left side shield.
4. Remove 2 screws G (T3x8) to remove the filter board.
5. Remove the Air filters.
A M4x4)
C T(3x6)x4
FN905
FN903
FN904
Mounting duct
bottom
Mounting duct
top
Air filter
A
B (T3x12)x2
B
C
C
C
D(T3x12)x2
D
Air filter base
Filter Board spacer sheet
Air filter
Left side shield
E (T3x8)
G

Sanyo PLC-XU300K Specifications

General

Brand	Sanyo
Model	PLC-XU300K
Category	Projector
Language	English