10
Operation with the Remote
Control Unit (continued)
4. Fan Only
If you want to circulate air without any temperature
control, follow these steps:
STEP 1 Press the MODE selector button to switch
to the fan mode .
STEP 2 Press the ON/OFF operation button.
STEP 3
Press the FAN SPEED selector button
to select the fan speed of your choice
(, or ).
STEP 2
STEP 1
STEP 3
5. ECONOMY Mode
ECONOMY Mode is used for saving energy.
Press the ECONOMY button while operation.
The mark appears in the display.
To release the economy function, press the
ECONOMY button again.
A. In Cooling and DRY Mode: ( and )
When the ECONOMY mode is selected, the air
conditioner automatically raises the temperature
setting 1 °C when 30 minutes have passed after
the selection was made, and then another 1 °C
after another 30 minutes have passed, regardless of
the indoor temperature when economy was selected.
This enables you to save energy without sacrificing
comfort. This function is convenient when gentle
cooling is needed.
Setting
temperature
Press the
ECONOMY button
30 min.
30 min.
Time
1°C
1°C
B. In Heating Mode: ( )
When the ECONOMY mode is selected, the air
conditioner automatically lowers the temperature
setting 2 °C when 30 minutes have passed after
the selection was made, and then another 2 °C after
another 30 minutes have passed, regardless of
the indoor temperature when economy was selected.
This enables you to save energy without sacrificing
comfort. This function is convenient when gentle
heating is needed.
Setting
temperature
Press the
ECONOMY button
30 min.
30 min.
Time
2°C
2°C
3. Adjusting the Fan Speed
B. Manual fan speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to
the position. This automatically sets the best
fan speed for the room temperature.
If you want to adjust fan speed manually during
operation, just set the FAN SPEED selector button
as desired. [ , , or ]
To Next Page
Loading...
Need help?
General
