16 Getting Started
Taking your First Photo
English
Setting the Flash Mode
You can choose from four flash modes to suit various lighting conditions.
Press the Up/Flash navigation button to scroll through the four modes on the
LCD screen. The flash setting remains the same for subsequent photos until you
change it as described above.
Using the Zoom in/out Function
The camera comes equipped with 3x optical zoom and 5x digital zoom that allows
you to zoom in on your subject.
To use the zoom:
1. Slide the Zoom switch to the right to zoom in on your subject.
2. Slide the Zoom switch to the left to zoom out from your subject.
Using the Self-timer and Burst Photography
The camera comes equipped with a self-timer which allows you to take photos after
a pre-defined delay. The burst photography feature allows you to take multiple con-
secutive photos by pressing and holding the Shutter button. The multi-burst pho-
tography feature allows you to take multiple (16) consecutive VGA photos by
pressing the Shutter button once.
To set the self-timer/burst mode:
1. Press the Right/Self-timer navigation button to cycle through the self-
timer( or ) and burst photography options ( or ) on the LCD
screen.
2. Once you have selected an option, frame and take your shot. In self-timer
mode, the icon will flash until the time expires and the photo is taken.
3. After taking a photo, the Self-timer automatically exit. If you want to use these
functions for the next photo, press the Right/Self-timer navigation button
again to activate the function.
Auto flash: The flash fires automatically when needed.
Fill flash: The flash always fires.
Flash off: The flash is turned off.
Anti Red-eye: The flash fires twice so as to reduce the red-eye effect.
To Next Page
Loading...
Need help?
General
