SATO CL6NX User Manual

15
Sending PDF Data to Printer
You need to set up the connection between your source (i.e. core IT system, PC application, mobile
device, cloud, etc.) and the printer via the supported connectivity. The available interfaces (LAN,
WLAN, USB, RS-232C, IEEE 1284 and others) are depending on the printer.
Supported Print Data
• The Direct Print function enables you to print documents and graphic data without using printer
commands such as SBPL commands. The supported document format is PDF.
• Make sure that the font data is embedded in the PDF file. Otherwise, the data might not be
printed correctly due to the printer will substitute the original font with its internal font.
• Do not use outlined PDF data as this will result in larger file size. Recommended using PDF data
(ISO 32000-1) that is not outlined.
• The maximum available file size that can be sent depends on the printer's memory. The
recommended PDF file size is less than 50 MB.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g