Scheppach GS55 Instruction Manual

www.scheppach.com
GB
|
27
14. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work-
shop.
Fault Possible cause Remedy
The motor doesn’t start.
The upper housing unit is not properly
closed.
Screw in the safety thoroughly
The extension cable is defective. Exchange the extension cable or repair it.
No current is coming out of the outlet. Check the mains fuse.
The switch is defective. Check/change
The motor is defective, the capacitor is
defective
Check/change
Shredder material is obstructing the
blade disc.
Pull the main plug, open the housing and
clean it out.
The motor doesn’t do
anything, the safety
default switches on.
The extension cable has an insu󰀩cient
cross section
Choose an extension cable with a larger cross
section
The cable between the power system
connection and the shredder is too long.
Create the shortest possible way between the
power system connection and the shredder.
The motor is overloaded
the safety default
switches on.
The quantity of wet shredded material is
too high.
Select a smaller quantity of shredded material.
Now and then, include dry shredding material
The blade and output areas are clogged. Pull the main fuse, open the housing and
clean it out.
The blade is dull. Resharpen or change
The cable between the power system
connection and the shredder is too long.
Choose an extension cable with a larger cross
section.
The shredder intake is
diminished, reduced
cutting capacity.
The blade is either dull or worn out. Turn blade, sharpen blade or replace entirely.
Excessive vibrations/
noise
Blade nut/bolt loose Tighten blade nut/bolt
Cutting blade damaged Replace blade
Machine damaged internally Contact Service Agent

Scheppach GS55 Specifications

General

Brand	Scheppach
Model	GS55
Category	Paper Shredder
Language	English