19GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specied,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc-
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.
2. Layout and items supplied (Fig. 1)
1. On/Off switch
2. Safety window
3. Spark de ector
4. Safety hood
5. Grinding wheel
6. Polishing wheel
7. Workpiece support star screw
8. Workpiece support
9. Mounting holes
10. Spark de ector adjusting screw
11. Speed controller
12. Flexible shaft
13. Locking pin
14. Wrench
3. Scope of delivery
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty pe-
riod has expired.
ATTENTION
The device and packaging materials are not toys!
Children must not be
allowed to play with plastic bags, lm and small parts!
There is a risk of swallowing and suffocation!
• Double-wheel grinder
• Safety glass with spark deector
• Workpiece support
• Flexible shaft
• 100-piece aAccessories
• Original operating instructions
• Safety instructions
4. Proper use
The double-wheel grinder is a combination tool for the
grinding and polishing of metals, plastics and other ma-
terials using the appropriate grinding wheels.
The exible shaft is designed for the grinding, deburr-
ing, polishing, engraving, cutting, milling and cleaning of
wood, metal and plastic in modelmaking, in workshops
and in the home. Use the tool and its accessories only
for the applications described.
GB
To Next Page
Loading...
Need help?
General
