Scheppach HL730 User Manual

www.scheppach.com
GB
|
25
Forward speed 4,5 cm/s
Return speed 16,5 cm/s
Oil quantity 3,5 l
Weight approx. 98,5 kg 95,5 kg
Subject to technical changes!
Noise
m Warning: Noise can have serious e󰀨ects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.

sound power level L
WA
97,4 dB (A)
sound pressure level L
pA
89,8 dB (A)
uncertainly K
WA/pA
3 dB

sound power level L
WA
98 dB (A)
sound pressure level L
pA
89,8 dB (A)
uncertainly K
WA/pA
3 dB
* S6 40%, continuous operation periodic duty. Identical
duty cycles with a period at load followed by a period
at no load. Running time 10 minutes; duty cycle is 40%
of the running time.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a splitting
force of up to 7 tons. In the basic setting, hydraulic
splitters are set at the factory to an approx. 10% low-
er output level. For safety reasons, the basic settings
must not be changed by the user.
Please note that external circumstances such as oper-
ating and ambient temperature, air pressure and mois-
ture a󰀨ect the viscosity of the hydraulic oil. In addition,
manufacturing tolerances and maintenance errors can
a󰀨ect the reachable pressure level.
8. 
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
The machine has been built using modern technol-
      

• The splitting tool can cause injuries to ngers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece is
not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch o󰀨 the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not press
the start button while inserting the plug into the
socket.
• Use the tools recommended in this manual to obtain
the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
7. Technical data
Motor V/Hz 230V / 50Hz 400V / 50Hz
Input P1 W 3000 2100
Output P2 W 2200 1500
Operating mode S6 40% S6 40%
Motor speed 1/min 2800 2800
Phase inverter - yes
Dimensions D/W/H 850 x 915 x
1495
850 x 915 x
1495
Table height 800 mm
Working height 920 mm
Log length
min. - max.
250 - 550 mm
Log diameter
min. - max. :
100 - 300 mm
Power max. tons* 7
Piston stroke 495 mm

Scheppach HL730 Specifications

General

AC input voltage	230 V
AC input frequency	50 Hz
Product type	Electric log splitter
Product color	Black, Blue
Maximum pressure	7 t
Maximum log length	550 mm
Maximum log diameter	300 mm

Weight and Dimensions

Depth	850 mm
Width	915 mm
Height	1495 mm
Weight	98500 g