www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26
|
GB
During longer work, because of vibrations, there is
a risk of circulation problems in the user‘s hands
(white-nger-syndrome). White-nger-syndrome is
a vascular disease where the small blood vessels in
ngers and toes contract seizure-like. The affected
areas are no longer supplied with blood and there-
fore look very pale. Frequent use of vibrating ma-
chines can cause nerve damage in people whose
circulation is compromised (e.g. smokers, people
with diabetes).
If you notice unusual impairment, immediately stop
the work and consult a doctor. Observe the following
notices in order to reduce risks:
• Keep your body, and particularly your hands, warm
in cold weather.
• Take regular breaks during which you should move
your hands to promote circulation.
• Ensure the lowest possible vibration of the ma-
chine by regularly maintaining it and keeping com-
ponents tight.
6. Technical data
Type engine
four stroke engine/air
cooled
Cubic capacity 132 cm
3
Rotation speed 2800 U/min
Fuel
Regular grade petrol/lead-
free max. 5% bioethanoll
Capacity tank/
gasoline
0,8 l
Motor oil SAE 30/10W30
Capacity tank/oil 0,4 l
Cutting height
adjustment
25 - 75 mm / 7-level
Collection bag
capacity
45 l
Cutting width 42 cm
Weight 22,4 kg
Power 2,5 kW
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
pA
= 79,8 dB(A)
Uncertainty K
PA
= 3 dB(A)
Sound power L
WA
= 91,3 dB(A)
Uncertainty K
PA
= 1,93 dB(A)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A
hv
(left/right) = 8,125 m/s
2
Uncertainty K
PA
= 1,5 m/s
2
• Switch off the engine:
– when you leave the lawn mower.
– before you refuel.
• Operation of the machine at higher than normal
speed can lead to an increased risk of accidents.
• Take care when carrying out installation work on
the machine, and avoid trapping ngers between
the moving cutting tool and the xed parts of the
machine.
• Please be particularly careful when mowing on
ground that may subside, on nearby landlls,
trenches and embankments.
• Observe improper maintenance, the use of
non-compliant spare parts, or removal or modica-
tion of the safety devices may result in damage to
the device and serious injury to the person working
with it.
• Use only manufacturer recommended cutting tools
and accessories. The use of other tools and other
accessories may cause injury to the user. Always
keep the lawnmower in good working condition.
• Check the device regularly and make sure before
each use that all start locks and push buttons func-
tion properly.
• Please note that the safety systems or features of
the lawnmower must not be tampered with or de-
activated.
• Note that the user should not modify or manipulate
any sealed engine speed control settings.
• The user must be adequately trained in use, ad-
justment and operation (including prohibited oper-
ations).
• It is necessary to take sufcient breaks to reduce
the noise and vibration load.
Residual risks and accident prevention stand-
ards
Neglect of ergonomic principles
Negligent handling of personal protective equip-
ment (PPE)
Negligent handling or ommission of the personal pro-
tective equipment may cause serious injuries.
– Wear prescribed personal protection equipment.
Human behaviour, misbehaviour
– For any work be fully concentrated.
m Residual risks - Cannot be entirely excluded.
Danger from noise
hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
– Always wear ear-muffs.
In case of emergency
In case of a possibly occuring accident take the nec-
essary rst aid steps as appropriate and obtain qual-
ied medical aid as quickly as possible.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
