www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
23
2. Layout
1. Handle
2. -
3. Engine brake lever
4. Upper push bar, 4a lower push bar
5. Quick-release lever
6. Petrol tank
7.
8. Side discharge
9. Wheel
10. Spark plug
11. Exhaust
12. Dip stick
13. Drive wheel
14.
15.
16. Grass box
17. Pull starter
18. Cable clips
19. Mulch insert
20. -
21. Primer button
3. Scope of delivery
Fig. 1 (1 - 19 / a - f)
a) 2 x round head screw M8
b) 4 x washer small
c) 2 x washer big
d) 4 x plastic star grip nut
e) 1 x manual
• Open the packaging and remove the device care-
• Remove the packaging material as well as the
packaging and transport bracing (if available)
•
• Check the device and its spare parts for possible
•
period has expired
•
• For accessories, consumables and spare parts,
• Include our item number, the device model and
•
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, lm and small parts! There is a risk of swal-
lowing and suocation!
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
and success.
Note:
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•
technicians,
• Installation and replacement of non-original spare
parts,
•
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
-
service life of the machine.
-
-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op-
-
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
operating manual and the particular instructions for
-
ulations for the operation of identical devices must
be complied with.
arise due to non-observance of these instructions