www.scheppach.com
22
|
GB
• Clean the device at regular intervals using a damp
cloth and a little soft soap.
parts of the device.
penetrate the device interior.
tool will increase the risk of electric shock.
-
lected can be drained out.
the stainless steel container (8). To remove residual
locking hooks (3) from the stainless steel container (8).
Pour out the liquid residue. Clean the container with a
damp cloth.
•
• Do not use cleaning
agents or solvents.
• Keep the ventilation slots clean and free of dirt and
dust.
•
cloth.
•
13. Storage
frost-free place that is inaccessible to children. The op-
Store the power tool in its original packaging. Cover the
power tool to protect it from dust or moisture. Store the
operating manual with the power tool.
•
wheel (1).
• There are four recesses on the top side of the caster
(Fig. 14)
• The suction hose can also be hung on the machine
head (2) using the plastic extension tube with fasten-
ing hooks (b), as shown in Fig. 14.
Damaged electrical connection cable
The insulation on electrical connection cables is often
damaged.
• Pressure points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been improp-
• Places where the connection cables have been cut
due to being driven over.
•
outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insulation
damage.
Check the electrical connection cables for damage
Ensure that the connection cables are dis-
connected from electrical power when checking for
damage.
-
cables of the same designation.
Connection type Y
-
avoid dangers.
For single-phase AC motors, we recommend a fuse
rating of C 16A or K 16A for machines with a high start-
ing current (from 3000 watts)!
12. Cleaning
m WARNING!
-
ments, maintenance or repair work!
• Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible.
compressed air at low pressure.
•
To Next Page
Loading...
Need help?
General
