www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
18
|
GB
i) Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing. Contact with the stirrer may lead to
serious personal injury.
j) Start up and run down the power tool in the
mixing container only. The stirrer may bend or
spin in an uncontrolled manner.
Residual risks
m The machine has been built according to the
state-of-the-art and the recognised technical safety
requirements. However, individual residual risks can
arise during operation.
•
rotating mixing paddle.
• Hazard due to electrical power with the use of im-
proper electrical connection cables.
•
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „Safety in-
structions“ and „Intended use“ are observed along
with the complete operating instructions.
6. Before commissioning
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, keep the packaging until the end of the
warranty period.
ATTENTION!
The device and the packaging are not children‘s toys!
small parts! -
ing!
Before connecting the machine to the mains power,
make certain that the data on the type plate matches
with the mains power data.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5. Service
a)
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
m ATTENTION!
during operation. -
sive medical implants under certain conditions. In or-
der to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the machine.
Mixer safety instructions
a) Always hold the power tool with both hands
on the intended handles. Loss of control can
cause personal injury.
b)
-
mosphere. Developing vapour may be inhaled or
be ignited by the sparks the power tool produces.
c) Do not mix food. Power tools and their accesso-
ries are not designed for processing food.
d) Keep the cord away from the working area.
The cord may be entangled by the stirrer.
e) Ensure that the mixing container is placed in
A container that is
not properly secured may move unexpectedly.
f) Ensure that no liquid splashes against the
housing of the power tool. Liquid that has pen-
etrated the power tool can cause damage and
lead to electric shock.
g) Follow the instructions and warnings for the
material to be mixed. Material to be mixed may
be harmful.
h) If the power tool falls into the material to be
mixed, unplug the power tool immediately
and have the power tool checked by a quali-
Reaching into the mixing
container with the power tool still plugged in can
lead to electric shock.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
