9 0800 862 0453
USING THE
FLEXOLOGY™ WAND
WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in Flexology
Storage mode, press the
Flexology Wand button
and gently fold the
handheld vacuum down
toward the floor nozzle.
TIP: The carry handle
located below the
handheld vacuum can also
be used to assist in taking
the vacuum in and out of
Flexology Storage mode.
NOTE: Before vacuuming
your delicate rugs or carpet,
refer to the rug manufacturer’s
recommended cleaning
instructions.
1 To start vacuuming, press the Power button, then recline
the wand to start the brushrolls.
USING THE FLEXOLOGY WAND
To easily access hard-to-reach areas under furniture without
having to bend down, press the Flexology Wand button to
position the wand to a lower angle.
FLEXOLOGY STORAGE
1 Press the Flexology Wand Lock Release button and gently
fold the handheld vacuum forward toward the floor nozzle
until it locks in storage mode. Use the handle to carry the
vacuum to its storage location.
To take the vacuum out of storage mode, press the Flexology
Wand Lock Release button while lifting up the handheld
vacuum. When straightened, the wand will lock in place.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
The brushrolls are off
because the vacuum is off,
or the nozzle is not correctly
connected to the wand or
handheld vacuum.
USAGE
STORAGE
To Next Page
Loading...
Need help?
General
