17 0800 862 0453
MAINTAINING YOUR VACUUM - CONT.
MAINTAINING THE BRUSHROLL
1 Open the brushroll lid by sliding both release buttons away
from you, toward the back of the floor nozzle, then lifting off
the garage. Remove any string, hair, or debris that may be
wrapped around the brushroll by running scissors along the
guide on the brushroll.
2 Close the brushroll lid by inserting the tabs on the lid into
the slots on the floor nozzle, then pressing down on the lid,
above the headlights, until both sides click into place.
WARNING: When
cleaning brushroll, be
sure to not cut anything
other than hair, string,
fibres, or other debris.
TIP: Ensure the brushroll
garage is completely
sealed and closed before
using.
NOTE: Heavy usage over
time may require minimal
upkeep in order to maintain
your vacuum’s appearance.
STEP 1 STEP 2
To Next Page
Loading...
Need help?
General
