14U10/15
14U20/25
31
14U10, 14U15, 14U20, 14U25 HOTEL MODE APPLICATION
How to enable/disable the "Hotel Mode" ?
Ans: a) Press the R/C (FUNCTION) key until language selection appear, within five second press the (one/two
digit) key and keep pressing it for five second, then you can see the hotel mode with four digits password.
b) Key in the four digits password starting with number "1", "3", "7", "9", then the hotel mode will be enable,
you can switch on/off the hotel mode by using R/C (volume up/down) key.
* We recommend
Before set the hotel mode, it is better to choose ch 1 & set s-vol level Up to 75% full scale.
After set hotel mode, starting channel will be always ch 1 & maximum sound level out will be set the half of
full scale.
* If you set hotel mode in AV, starting channel will be the last ch which you received before power off (same as
normal operation)
HOTEL ON
PASSWORD ****
Set vol up/down by R/C key.
Input 1,3,7,9 by R/C key.
#1Ch 1 is your selected channel
for hotel mode.
CONDITION:
When using hotel mode, user can control "contrast", "brightness", "sharpness" and "tint" function.
But after power off, it will return to the initial setting.
You can't use:--
Preset mode
Fine tuning
Skip mode
System selection
The others function is allowed to be used.
To Next Page
Loading...
Need help?
General
