>>
<<
Appendix
Troubleshooting - Error Message
The example of an error
message displayed on a
screen
Error code Possible Solution
Failed to receive
broadcast.
E202 Check the antenna cable. Check that the antenna
is correctly setup.
No broadcast now. E203 Check the broadcast time in the program guide.
An incompatible audio
signal has been
received. Check the
output device settings.
— This message is displayed when an audio format
other than PCM, Dolby Digital is input.
- Set the audio output format of connected
external HDMI equipment to PCM, Dolby Digital.
- Refer to the operation manual of the external
equipment for setting details.
ENG 10-8
To Next Page
Loading...
Need help?
General