Sharp CD-C1W User Manual

CD-C1W,CP-C1W
– 3 –
● General
Power source: AC 110/127/220/230-240 V,
50/60 Hz
Power
consumption: 500 W
Dimensions: Width; 270 mm (10-5/8")
Height; 356 mm (14-3/16")
Depth; 355 mm (14")
Weight: 10.5 kg (23.1 lbs.)
● Amplifier section
Output power: PMPO; 2400 W (total)
MPO; 440 W (220 W + 220
W)
(10 % T.H.D.)
RMS; 300 W (150 W + 150
W)
(10 % T.H.D.)
Input terminals: Video/Auxiliary (audio sig-
nal); 500 mV/47 kohms
Output terminals: Speakers; 6 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Line output; 500 mV/47
kohms
● Compact disc player section
Type: 3-disc multi-play compact
disc player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
Rotational speed: 200 - 500 rpm CLV, Approx.
Error correction: CIRC (Cross Interleave
Reed-Solomon Code)
Quantization: 16-bit linear
Filter: 4-times oversampling digital
filter
D/A converter: 1-bit D/A converter
Frequency
response: 20 - 20,000 Hz
Dynamic range: 90 dB (1 kHz)
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
● Tuner section
Frequency range: FM; 88 - 108 MHz
SW2; 9.5 - 21.85 MHz
SW1; 3.2 - 7.3 MHz
MW; 531 - 1,602 kHz
● Cassette deck section
Type: Compact cassette tape
Frequency response: 50 - 14,000 Hz (Normal tape)
50 - 15,000 Hz (CrO
2 tape)
Motor: DC motor with electronic governor × 1
Signal/noise ratio: 55 dB (TAPE 1, playback, Dolby NR
off)
50 dB (TAPE 2, recording/playback,
Dolby NR off)
Dolby NR effect; 10 dB
(at over 5 kHz)
Bias and erasure
system: AC
Tape speed: 4.76 cm/sec. (1-7/8 ips.)
Wow and flutter: 0.15 % (WRMS)
Heads: TAPE-1: Playback × 1
TAPE-2: Record/playback × 1
Erase × 1
● Speaker section
Type: 3-way type [20 cm (7-7/8") woofer,
8 cm (3-3/16") tweeter and super
tweeter]
Rated input power: 150 W
Maximum input power: 300 W
Impedance: 6 ohms
Dimensions: Width; 295 mm (11-5/8")
Height; 361 mm (14-1/4")
Depth; 378 mm (14-15/16")
Weight: 6.7 kg (14.8 lbs.)/each
SPECIFICATIONS
CD-C1W
CP-C1W

Sharp CD-C1W Specifications

General

Brand	Sharp
Model	CD-C1W
Category	Speaker System
Language	English