Sharp CV-PD13PX User Manual

in this operation, the air conditioner fan works at extra high speed with a setting
temperature of 59°F.
1
Press the IVlEGA COOL button during cooling
mode.
• The remote control will display "_ "
• The temperature display will go off.
• The green MEGA COOL lamp on the unit will light.
1
I TO CANCEL I
Press the MEGA COOL button again.
• MEGA COOL operation is also cancelled when the
mode is changed, or when the unit is turned off.
• The green MEGA COOL lamp on the unit will turn
off.
NOTES:
• You cannot set the temperature or fan speed during MEGA COOL operation.
• The fan returns to the HIGH speed setting after the unit has run for 30 minutes in MEGA
COOL mode.
• The extra high fan speed may automatically slow down to protect the unit.
When SLEEP operation is set, the temperature setting is automatically adjusted to
)revent the room from becoming too cold.
1
1
Press the SLEEP button during cooling
mode.
• The remote control displays " _ "
• The orange TIMER lamp on the unit will light.
• The unit will stop operating after 8 hours.
• The fan speed setting is set to AUTO.
( 1
Press the SLEEP button.
NOTES:
• One hour after the SLEEP operation is started, the
temperature setting rises by 2°F and after another
hour it rises by an additional 2°F. Temperature display
on the remote control will not change from its original
setting.
• SLEEP operation and MEGA COOL operation can
not be used together.
• The OFF TIMER, ON TIMER and SLEEP operation
can not be set together.
Only the most recent settings will be used.
• The orange TIMER lamp on the unit will turn off.
• SLEEP operation is also cancelled when the mode
is changed, or when the unit is turned off.
8hours
ilhour.lhour
Start of
SLEEP operation
Unit shuts off
E-28

Sharp CV-PD13PX Specifications

General

Brand	Sharp
Model	CV-PD13PX
Category	Air Conditioner
Language	English