Sharp FV-DB2E User Manual

16
FV-DB2E
05/4/21 FVDB2E_UK.fm
TINSEA048SJZZ
Advanced Features
Storing stations
" Memorising a station
You can store up to 20 DAB and FM stations (5 stations for each
zone A-D) and recall them at the press of a button.
For FM stations, stereo and mono modes are memorised.
Note:
If memory batteries are not inserted or low, preset stations will be
lost. When the AC adaptor is connected, preset stations remain
without memory batteries. Preset stations will be lost if the unit is
powered only by the main batteries and set to the power stand-by
mode.
" To recall a memorised station
Note:
If the selected preset number is empty the display shows "Preset **
empty".
" To erase entire preset memory
If the "TIME SHIFT" indicator is on the display, press the TIME
SHIFT button to turn it off.
1 Tune in to the desired station (see pages 10, 15).
2 Press the PRESET SELECT button repeatedly to select the
desired preset zone.
Zone A
Zone B
Zone C
Zone D
3 Hold down the PRESET button (1 - 5) for
2 seconds or more to store the station
in memory.
4 Repeat steps 1 - 3 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
1 Press the PRESET SELECT button repeatedly to select the
desired preset zone.
2 Press the PRESET button (1 - 5) for less
than 1 second to recall a station.
1 Hold down the PRESET SELECT button
for 3 seconds or more.
2 Within 30 seconds, press the ENTER
button.

Sharp FV-DB2E Specifications

General

Brand	Sharp
Model	FV-DB2E
Category	Receiver
Language	English