20
FV-DB2E
05/4/21 FVDB2E_UK.fm
TINSEA048SJZZ
Advanced Features
Sleep operation
When the set time elapses, the unit turns off automatically.
Before setting sleep:
Note:
The kitchen timer starts at a set time even if the sleep operation is
set for the same time. The sleep operation starts after the kitchen
timer ends.
" To use alarm and sleep operation together
For example, you can fall asleep listening to the radio and wake up
to alarm in the next morning.
For the sleep operation, connect the AC adaptor to the unit. If
batteries are the only power source, setting is not possible
(see page 6).
1 Press the CLOCK button repeatedly to
select "Set sleep".
2 Within 30 seconds, move the operation
lever toward TUNING UP or TUNING
DOWN to select the desired sleep time.
! Select set time from 1 - 120 minutes by
the minute.
! Move the operation lever once to change the time by 1
minute. Hold it to change continuously.
3 Within 30 seconds, press the ENTER
button.
! "SLEEP" appears in the display of the unit.
! Remaining time is displayed during the sleep operation.
! The volume gradually decreases for the last 1 minute.
4 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
21 119 120
...
To cancel the sleep setting:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, press the CLOCK button until "Sleep off ok?" appears on the
display, then press the ENTER button.
1 Set the sleep operation (steps 1 - 3).
2 Set the alarm (steps 1 - 6, page 18).
The unit enters the power stand-by mode after the time is set for
sleep operation, and turns on at the start time of the alarm.
Sleep setting
Alarm setting
Alarm starts.Sleep operation
will automatically
stop.
Sleep
operation
starts.
Start time
1 minute - 2 hours
1
2
To Next Page
Loading...
Need help?
General
