Sharp GX-BT7 User Manual

E-12
Connecting other equipment
1 Use a connection lead to plug in the portable audio
player, etc. to the AUDIO IN socket. When using video
equipment, plug in the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO IN button on the remote control or
FUNCTION button repeatedly on the main unit to select
AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
Note:
To prevent noise interference, place the unit away from
the television.
Listening to the playback sounds of
portable audio player, etc.

Portable audio
player, etc.
Audio cable (not supplied)
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the
following before calling your authorised SHARP dealer or
service centre.
General
Symptom Possible cause
 When a button is
pressed, the unit
does not respond.
 Set the unit to the power
stand-by mode and then
turn it back on.
 If the unit still malfunctions,
reset it. (Refer page 13)
 No sound is heard.  The volume level is set to
minimum.
Remote control
Symptom Possible cause
 The remote control
does not operate.
 The AC power lead of the
unit is not plugged in.
 The batteries are
exhausted.
 The distance or angle is
incorrect.
 The remote control sensor
receives strong light.
NFC / Bluetooth■
Symptom Possible cause
No sound is heard.● The unit is too far from the
Bluetooth stereo audio
source device.
The unit is not paired
with the Bluetooth stereo
audio source device.
●
●
Bluetooth sound
is interrupted or
distorted.
● The unit is too near to
a device that generates
electromagnetic radiation.
There is an obstacle
between the unit and the
Bluetooth stereo audio
source device.
●
●
Open Accessory■
Symptom Possible cause
No sound is
produced.
● The device is not playing.
The device is not properly
plugged in to the unit.
The AC power lead of the
unit is not plugged in.
●
●
●
Device will not
charge.
● The device is not making
full contact with the USB
terminal.
●
GX-BT7_OM_EN.indd 12GX-BT7_OM_EN.indd 12 2013-08-02 11:24:472013-08-02 11:24:47

Sharp GX-BT7 Specifications

General

Karaoke	-
Speaker type	2-way
Audio amplifier	Yes
RMS rated power	20 W
Number of speakers	2
Cassette deck	No
Product color	Black, Silver
Audio formats supported	MP3, WMA
Display type	LED
Backlight color	Blue
Apple docking compatibility	iPad 2, iPhone, iPod
Input voltage	100-240 V
Input frequency	50 - 60 Hz
Power consumption (standby)	0.4 W

Weight and Dimensions

Weight	2280 g