Quick guide
After unpacking and plugging in your new LCD TV, please proceed with the following steps to set-up your TV� If you
do not run this set-up function, your LCD TV may not operate properly�
Confirm the following before turning on the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
Press the 1. < or > buttons to select your
language. And press the Green button to
continue.
TV Installation
Please select your language.
Next
Български
Česky
Dansk
Deutsch
Ελληνικά
English
Español
Français
Press the 2. < or > buttons to select your
country. And press the Green button to continue
or press the Yellow button to the previous.
TV Installation
Please select your country.
NextPrevious
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
UK
Ukraine
System searching may take up to 20 minutes to 3.
complete. Please wait until system searching is
completed, and then press the Green button to
next step.
TV Installation
System searching. Please wait...
Digital channels found:
Analogue channels found:
Auto programming may take up to 20 minutes to complete.
Please wait untill you see the Auto Programming.
NextPrevious
0
0
Channel search completed message may show 4.
out when system searching is finished. Press
the Red button to finish system searching, and
then the LCD TV will switch automatically to the
first channel found.
Enjoy your television ! If latter on you still want to
change a setting, you can go to the menu.
Finish Previous
First time installation
8
To Next Page
Loading...
Need help?
General